Artificial intelligent assistant

spindle-shank

answer Answers

ProphetesAI is thinking...

MindMap

Sources

1
spindle-shank
spindle-shank Also spindleshank, spindle shank. [spindle n. 15 a. Cf. G. spindelbein LG. spil-, spillenbên, Du. spillebeen.] 1. A long and slender leg. (Chiefly with contemptuous force and usu. in pl.) a. Of persons.1570 ? Redford Marr. Wit. & Sci. ii. i, But what if she finde fault with these spind... Oxford English Dictionary
prophetes.ai 0.0 3.0 0.0
2
Flapwheel
Portable flapwheels were made by bonding radial flaps of abrasive into a hub fitted with a spindle shank. wikipedia.org
en.wikipedia.org 0.0 1.5 0.0
3
spindle-shanked
spindle-shanked, a. [Cf. prec.] 1. Having long and slender legs; spindle-legged. (Usu. with contemptuous force.) a. Of persons or animals.c 1600 Timon ii. i. (1842) 25, I did reject..Demetrius Cause he was spindleshankt. 1692 Lond. Gaz. No. 2787/4 Went away from his Master.., one Cæsar Rammer,..aged... Oxford English Dictionary
prophetes.ai 0.0 0.90000004 0.0
4
Drill bit shank
The Morse taper allows the bit to be mounted directly into the spindle of a drill, lathe tailstock, or (with the use of adapters) into the spindle of milling A range of sleeves may be used to bring the size of the smaller Morse tapers up to the size of the drive spindle's larger taper. wikipedia.org
en.wikipedia.org 0.0 0.6 0.0
5
Countersink
On a drill press, the slowest available spindle speed is usually best. With a quarter-inch-hex shank, the countersink cutter can be held with a screwdriver handle of the indexable-bit type. wikipedia.org
en.wikipedia.org 0.0 0.6 0.0
6
incomprehensibly
incompreˈhensibly, adv. [f. as prec. + -ly2.] In an incomprehensible manner or degree; † infinitely (obs.); beyond mental comprehension, inconceivably, unintelligibly.1531 Elyot Gov. iii. xxx, Their soules..shall be incomprehensibly rewarded of the gyuer of wisedome. 1664 H. Power Exp. Philos. i. 17... Oxford English Dictionary
prophetes.ai 0.0 0.3 0.0
7
Wiggler (tool)
perfectly coaxially with the shank. Mechanical versions may work with the spindle stopped. wikipedia.org
en.wikipedia.org 0.0 0.3 0.0
8
Please explain how to use a flex-hone tool
standard flex home should be selected the Flex hone tool should be securely held in a collet Chuck or similar holding device it is best to use the shortest shank speed start with a spindle speed between 500 and 800 rpm you may need to experiment to find the optimum speed for your application never exceed 1,200
prophetes.ai 0.0 0.3 0.0
9
Collet
Yet another type of collet is a step collet which steps up to a larger diameter from the spindle and allows holding of larger workpieces. While threaded shank "Autolock" tools may be gripped by plain collets, such as ER, plain shank tools should never be used in an "Autolock" collet as they wikipedia.org
en.wikipedia.org 0.0 0.3 0.0
10
Machine taper
The drawbar is then tightened, drawing the shank firmly into the spindle. The results were the German DIN standards 69063 for the spindle and 69893 for the shank. wikipedia.org
en.wikipedia.org 0.0 0.3 0.0
11
Gear shaping
Process theory The types of cutters used for gear shaping can be grouped into four categories: disk, hub, shank, and helical cutters. The workpiece (or blank gear) rotates on a second shaft (spindle). wikipedia.org
en.wikipedia.org 0.0 0.0 0.0
12
Gymnopus fusipes
The species name fusipes indicates that the stem is spindle-shaped (from the Latin fusus meaning "spindle" and pes meaning "foot"). The English name "Spindle Shank" has been given to this species. wikipedia.org
en.wikipedia.org 0.0 0.0 0.0
13
Salish weaving
Creating the yarn was done with a shank which is usually 2–3 ft. long and holds the stone or preferably whalebone whorl. The spindle is rotated by striking the lower side of the whorl with the right hand, while the upper end of the shank is held between the thumb and forefinger wikipedia.org
en.wikipedia.org 0.0 0.0 0.0
14
Chuck (engineering)
There are four standard sizes with varying shank diameters: SDS Quick A 6 mm shank with two open grooves interacting with the driving wedges and two SDS-top A 14 mm shank similar to SDS-plus, designed for hammers from 2 to 5 kg. The grip area is increased to and the shank is inserted 70 mm. wikipedia.org
en.wikipedia.org 0.0 0.0 0.0
15
Hyophorbe amaricaulis
Description The palm is about high with a relatively thin gray trunk with a waxy crown shank. It is related to the bottle palm and spindle palm. wikipedia.org
en.wikipedia.org 0.0 0.0 0.0