all right so we here on another roof back roof been coated and what happened was unfortunately I'm showing you this after the fact that we started with I'm gonna give you the idea what's going on this is a scuffle this copper here so we're moving the excess material there and we're gonna lower that's copper now so what it does is secure you can see we're water Center so dark now let me show what this looks like like this alright you can see the pump here and water sitting on here but this one is not as bad as the other one was it was at least two-three inches of water on the other one and this one is very little water so there's no no time soon and only two years my assistant you see my assistant all right so we'll show you what it looks like when well we'll do step by step yeah so here's how we remove this stuff you can see this gosh that's like a cotton gauze a person well that's what they used with hard to make patches of stuff but that's not good this is a modified by human roof you can see the seams every three feet this machine I'm doing this with my iPhone so I hope it's not too shaky anyway what we do is I heat up now somebody used paper I scrape that away so I can get to the original membrane otherwise it's dude so here's the paper before the fire department come they gonna see the smoke and they want to come so I remove paper so there's the paper that people used other people other roofers do do a repair yeah all right that's how I remove it all right so this you can see how it's underneath yeah what's all it tell what is this yeah but now I have a low spot here which is the water we just run into you and and the membrane let me show you I can have the memory go right in here in there and this will be perfect nice nice nice all right since we put the membrane will show him how we do it okay so we got this aluminum coating they put over a roof to protect me everywhere here we actually took some stuff off of the wall here and this whole entire area is now prepared so we can put a membrane down and also we lower discovered in this wood we took some material away and lower this coupler so and then I took the paint off the scrubber you can see the top are showing there copper and copper here the copper and tars okay but I don't want paint on this copper what I'm doing this I'm gonna nail this to the alright so now I'm gonna do my membrane thickness to put a membrane inside starting from inside position is there and then some help okay so here's where Michael would start the base of it I'll get ready I mean to tie the membrane to metal you know most people would most people will heat up this membrane and just melt it to the metal it's not the way to do it we have this technique works for many years already and what we do is it it takes up all the unevenness of the metal but also it makes the mainframe stick better to the arm to the metal so that's very very important is very important but so this plastic has to be burned off otherwise so I squeeze the excess now the base is done so now I know I have a membrane going to the transition here so the rest becomes easy just to take this piece I think this piece I need to put tar on it metal on the other side so all right our metal day because I'm gonna do the same on this side nice see that nice very much that will never come loose Olli I do the same in the other side difficult position with all the painting really make sure this they're here right there so I'm gonna have to fix this up here you can see the membrane wants to come up the anus and I'll put a piece there just to make it look better all right so we don't with this coupler and we also seem to lose and this was not good and this couple is now lower than it used to be so this should drink pretty well and not leak anymore because we found a lot of seams lose him so another job well done and that's how you do a scuffle all right