hi I'm Shannon from host improvements comm today we're going to show a short video and it kind of goes along with the another video I have using two component spray foam DIY type products so watch our other video it'll show you all the safety and the setup and all the different procedures to use you know if you watch the first half of that video you'll catch all that stuff there we're spraying in a wall cavity here we're gonna use it to spray in a up in the joist end or a boxed end cavity which really is where the these type of products really do a really good job you can see we've got all this different things here kind of obstructions in the way when it's hard to get in there to use bad insulation so this way with the foam it just goes in expands and fills up that area and really does a great job of not only insulating but creating a vapor barrier as well okay so I'm gonna get my protective equipment on get my nozzle ready and just go ahead and spray so again like I said this is just more or less to show you how it can be used here and you should watch our other video on our YouTube channel to give you all the certain details on the product [Applause] so you can see there there's a lot easier to get in around all those layers and pipes and shoot the foam in then it was to get in there to cut this the bad insulation or a sheet styrofoam or anything like that and you can see how it's expanding out nicely and filling up those spots I've probably got a little bit too much in there in a couple areas but we're definitely going to have some insulation value there so please just make sure you use the proper protective equipment when you're doing it and for that information you can find it in the instruction booklet for the product you're using and you can also watch our other video that I referred to already so thanks a lot for watching and we'll talk to you next time