okay so this is the timber i'm going to use to make the budgie nest box i'm going to use 9 mil plywood and i'm going to use this piece of pine which is an inch take for to make the concave uh this is going to be the front of the budgie box i have the hole here already drew in and i also have these you can see them these lines draw on the back i'm going to use the table saw to cut two tracks along the back of this which you'll see later on to drill this hole i'm going to be using a two inch hole saw which just connects to the drill so so on the back section and also the front section of the box i have these lines marked out that i'm going to use the table saw to cut two tracks what i've done is i've just let the i've just let the blade up about half the thickness of the timber okay so now that i've finished doing all our cuts and our drilling i'm just going to start putting it all together um you could use panel pins or something like that put together blade you just use screws so that's the nest box all screwed together there now next thing to do is to make the uh concave i actually i already have it made i thought it was recording i thought the camera was recording but it wasn't but um all i used was red heavy an angle grinder with this grinding pad that goes onto it and just basically hollowed out concave going in sort of a cross direction like that and as you can see there see you can see that yeah you can see the hollow there in it so that's the only way i can do the concaves so i just put the concave in there now and as you can see the two tracks that i had cut out earlier were for i'm going to use a piece of glass that i had caught and i got all the corners polished so that there's no they're not sharp and you can't be cut and that just have this slides in there and then so we have our glass partition there and then our door then just goes over so is that when you have young chicks you can easily open up this door and still you're not really disturbing the birds and if there was chicks or maybe eggs that were up close to here they're never going to fall out because you're going to have the glass there to protect it you don't have to use glasses just it's just the way that i've always made the budgie boxes here i have a budgie box attached to one of the breeding cages the way i attach them is i just using a small screwdriver like screwdriver like this i was able to get two screws in and it's solid on its side is and just put concave back in a glass and a door so they're all ready now for next year's season these are some of some of my budgies i also have a video on my channel of making how to make an every like this one you