hey class how you doing today we're talking all about pruning room conditions and I want to make a video showing you what we're doing so first off is the mister we have a high-pressure misting system we purchase through arrow missed this is the pump the pump is then hooked up through a hose to a water source and electrically just to a normal outlet we do have it hooked up to a timer so this is set to go on every seven or eight minutes for about one minute alternatively you could have it hooked up to a mister now let's see what this thing does so here it is turning on and slowly the room start to fill up with a really fine mist and that's really what we want is this super fine mist so that the mushrooms don't get really wet but if it creates this nice humidity so as I'm like walking through this mist I'm barely getting wet so there's a risers that go the whole length and those shoot out the humidity the water ok the next feature I want to show you is our lighting so here is the lighting that we're using you have a link to it it's LED strip lighting and basically what we do is we run it down the length of the whole grow room on the bot on the top of each shelf so every shelf has its own lighting that the mushrooms are completely getting light and this is a 53-foot trailer and each one of these lighting things there's 150 feet they cost us $70 so in total to have all the lighting in here it cost us $200 which isn't really that expensive so that is the lighting and it's rated for for waterproof ip65 okay the next piece we can check in on is the intake fan so right here is our intake fan this has been working for a couple of years for us know we just transferred it from our other grow room and it's simply 10 inch we got it from can filter dot-com you have a link for it and it works really great some growers have a tube that's hooked up to that fan they'll run the length you can see how where this the humidity thing is they'll have a tube that runs the whole length so the air distribution is a little bit better and then through our other fan the bottom here we have our exhaust it's not on at the moment but so it's down at the bottom and just a not an exhaust fan this is from the professional grade products and it's a shutter fan so it kind of closes when it's not pushing the air out you know it's like getting some air pushed out because the intake fan is on but not a crazy amount okay and the last piece all talk to you about today is the shelving and what we've done is is pretty simple shelving where it's two by fours with two pieces of electrical conduit to either side so he did this whole length down and the result the bags just sit right on the conduit like this and then we have three shelves deep them works out pretty well