I know they're friends laters Bobby here today hey folks today we're going to be installing a chimney cap on our chimney so let's open up the box here let's see what this thing looks like oh yes there is a little bag of screws let's go ahead and get this box out of the way looks like it's pretty simple this is gonna sit on top of our 12 inch flue pipe it looks like there's a spot to put a screw on each corner and here's the screws right here so we're gonna grab a couple tools here and it looks like that's the like got about a three-eighths head on it I'm gonna double check that to make sure we're gonna grab some tools and head on up to the roof and get this baby installed okay Fred hey we're up here on the roof here's our little 12-inch chimney right here then we're gonna put the cap on - so let's go ahead and grab our chimney cap in place make sure it sits down there pretty good now as I was telling you earlier here's the tools that I brought up here I brought my cordless impact with a 3/8 socket on it that does fit those screws and I also brought my cordless drill with just a three sixteenths masonry bit cuz I'm going to show you what I'm gonna do you run a screw here on each corner but what I want to do is just kind of pre-drill into that masonry just a little bit just put an indentation into it to where when the screw hits it it's got like a little place to go inside there so I'm gonna go ahead on each corner and just pre-drill and for that mate about 1/8 inches up just enough to put a little divot into that masonry before I put these screws in okay with the screws that come with the chimney cap we're going use our cordless impact and we're just going to go ahead and run these in slightly and we want to get all four of them installed before we actually put the final torque make sure that it is pressed down good okay friends we've got all four of them kind of run in a little bit and we're just gonna come back on this just a little torque on our last two here and actually that's about it friends that's all you need to do just grab the cap make sure secure down on there good to where the wind can't blow and this will help to keep any animals from getting down into your chimney or leaves and other such debris thank you friends for watching a little video today and we will see you next time take care