let me show you how to straighten out a bent cattle panel this is one of the cattle panels that was on that blue shed that i showed you that the wind got a hold of and just bent the mass out of it well i've already straightened two of them here and i got thinking you might want to see that too so uh let me show you what i figured out the best way to do it i don't have a tripod so you're just going to bear with me as you can see this end here just about a foot or so from the end is bent pretty bad so that's what the end i'll start on first so just lay the uh lay you some boards these are two by twos lay them down at the last straight part this is pretty straight right in here and then it bends so lay it right there and i'm going to step on it stepping on it right here is bending it straight the very end of it's still a little crooked so i'll fix this it's just this last stay here maybe the last two stays right here that are bent so i put the boards on the very outside edge and just step in between and it straightens it up that one place right there it's a little high i'll just move the cattle panel forward to right there i'm sorry i'm shaking but i'm just out here with my iphone that is pretty straight as you can see we got issues there so i have to work on it you get the idea sheep came up with raising the ruckus thinking i was going to feed them but just to lay some boards on the ground again those are two patoos and just drag your panel to wherever your high spot is then come up here come back just a little bit right there's my high spot and just walk on it and that uh that big hump that was there a while ago is not there now is it perfect no they're not gonna be just like they come from the factory unless you really spend some time on it you can get it perfect i'm just saying i'm not gonna get it perfect my sheep don't care so uh but that's the one that was had a pretty good bow in it and uh see still got a little one right there right there but i'll get it i thought you might want to see that in case you uh bend one and just think it's useless it's not fix it we'll go