hi i'm going to show you how to make a toothpick gun like this one from a clothespin and a rubber band all right you can start off with a normal question like that a solid is what i'm using then you can use scissors you can use a knife but i like a saw blade better and then all you need is a rubber band the smaller rubber band the better it is the better it'll work but it doesn't really matter if you don't have one then it might work it might not i don't know but first you're gonna start off by taking this clothespin apart just like this so you have two pieces like this and this spring all right first you want to start off putting these together like that and what you want to do is take the top one and about right here right in front of this big group you're gonna want to cut all the way through i'm gonna go do that right now so so all right now that i've cut it i've had i have a piece like this all right and when you put it on there make sure the flat side is on top of the flat side like that see and these two holes line up and then what you want to do is take the bottom piece and in this groove right here you want to make a slit well see when you put it together like this right here going this way like like this so your spring will stay in it and not slick okay now let's cut that to it you and now i've cut it as you can see and there's a slit that i put in the groove all right now what you want to do take the piece that you cut put the flat side back on top of it like so so we'll sing a lot so that hole lined up take your rubber band and on these two big grooves on the end right here put your rubber band around and around make sure it is not too tight but tight enough to hold and but not too loose either fairly easy this little tab all right then here's the probably the trickiest part you gotta take this on the end put the top bill on and put in between the two you put one on the top okay then you want to push it back until that clicks in that hole that you in the groove that you made and then what you want to do is lift this up put it over top and pull this back until you hear a click or it loosens up and you can see the metal inside that groove now that's how you [ __ ] and load your weapon like that and this will shoot anything as to pennies quarters dimes toothpicks little pieces of wood now i'm going to take the little piece of wood that i cut and to load it you lift this up and slide it under it slide lift this up slide the piece under it make sure it doesn't go over top of the hole but right up against it and take your finger put it on the trigger put your finger on the back and pull there you go that's how you make a toothpick wood shooter gun thingy thanks for watching