Artificial intelligent assistant

Please explain how to make a cubby house door part 1.

my name's Larry James from covergirl I'm just quickly going to show you a little quiz on how to make the water in a cubby house this will basically show you how to lay them out twenty years of flat service there's two uprights in a cup of crab captain door and two cross braces if you find Australia here that you can put the outside on 45 degrees cuts will glue these and we will do the same to the top one on some glue down the edge you will already have one of these the door is normally the last thing that you do yes to make sure we get this right the cladding that comes with the door tip may be slightly too wide we've deliberately allowed to be a little bit wide in case the door frame you've made or the cladding of firaon is not quite right it's so measure the width of your door frame and allow five mil either side and often you'll need to trim these down to get the measurement you need so just measure the width of the door frame you have on your cubby and I'll have the clearance either side for the door so we just lay that frame out there just use the door cladding once you've trimmed it top and bottom give that frame nice and straight okay then run some blood down the frame these timbers are nice and why this stops the door dropping we'll put some screws in there but once the blue sets on the training it will stop the door dropping okay that top one there you just fix that there so it doesn't move once you've got once you've got the correct width of the door frame

xcX3v84RxoQ-4GxG32940ukFUIEgYdPy ae59cd4c172a8d5950df2a3722a410b0