it's really important that you know how to look after your export and how to clean it properly and one of the things that can lead to cross infection and contamination is when you don't clean your white spot and you may go into salons where it does have old wax residue running down that it's not being cleaned too frequently so if you can and it should all in a white spot look after it get into the habit of cleaning it at the end of each day or after a client and remember that there are certain products that are designed to help you make it as easy as possible and the best advice is not to use surgical spread it because over time it can actually lead to cracks in the plastic so you'll find that most product suppliers will actually have our wax equipment cleaner and it tends to be quite an oily chemical that can help you to just really get rid of any of the stickiness any of the residue so I'm sure you're just a few ways just know that you can easily clean your wax pot so the best thing to clean your wax pot is when it's still warm if you try to clean it when it's cold then the wax is solid and it just makes everything a lot longer and a lot more tricky to do so turn it off make sure that it's not roasting hot but it's starting to cool down and this is the best time to get it cleaned you've got your rights equipment cleaner this is also brilliant if you do get any wax onto clothing onto carpets onto bedding what you can do is saturate the area that's got the wax droppage on it it'll break it down make it a lot easier for you to remove it then if it was clothing on a toll once you've broken it down you can then wash it as normal the easiest tip that I ever got told was not to use tissue not to use cotton wool because all the fibers just start to break away and they stick to the wax it can also be the same with cloths as well the best thing that you can use is the strips that are actually designed to be used with the wax so either your fabric your paper or your bonded fiber and ideal because they're robust they're designed to work with it and what you can do is place some of your bike's equipment cleaner on them and start to use them to clean the right spot so you'll tend to have a lot of white to raise at you just roam the lid you'll tend to have some possibly coming down this aids if you've had a spillage and also if it's a chamber that can be removed it does start to get a little bit sticky around here so all you're doing is just with the wax equipment cleaner on it's just starting to work over all of this and remove any white residue and remove the stickiness if you get into the habit of doing this every time you've wax it at the end of each working day then you're going to find that it's much easier to clean and it's just a matter of minutes rather than spending quite a lot long timing basically doing this people that don't clean it very regularly some things have to spend about half an hour or more just trying to break those buildup so you're just working all the way over it if there's a little chamber that can be removed you can actually because of still heat in it very gently remove it and you can see that you may not be aware that you do actually get wax residue all the way around the chamber and if you do take out remember to put it on a surface that you can easily remove it from because it will be sticky underneath you're always surprised that white does get into the inner chamber here too so you can very carefully clean this area in here which is why you need to have your right support the chamber itself sitting on something that can be easily removed wrong because if you had this sitting on a towel or tissue you can see what could actually happen if it starts to sit you'll have a lot of trouble trying to remove that and clean it so this very says work quickly work with it still warm and then once you're finished everything everything can be put in Nathan quickly ready to use for the next thing you