a lot of you have one of these at home which sometimes work in the event that you have a plug toilet obviously you want to remedy that so let's talk a bit about how to use a plunger properly so I'm going to give you an example of a plunger that's not creating a proper seal which is actually going to have little or no effect on on clearing this toilet fortunately I have nice clean water in there so again trying to get a nice seal I can see I'm not getting a seal at the bottom here or at the top I'm going to give it a couple pushes and you're going to see water squirting out so here we go alright so again not a great seal add water going there if I pushed really hard that water might come back out of me there's a couple things you want to look for a has the water level in the bowl drop so oftentimes when we have a plug toilet we have sort of a water level up to here it's not too pretty after we've done the attic adequate plunging did we hear that water drain away did we see the water level drop the last thing you want to do is test whether you you've gotten that to drain by fully flushing the toilet because you're going to have not only the water that's already in there but you're going to have the additional storage of the tank come out and onto your floors if you've followed all the steps correctly you've tried plunging your toilet had no effect on it you're still plugged up and you're ready to put the plunger down give us a show that our MB we have all the proper equipment we can clear your toilet and any wines beyond that