slope lasts fast fitting rainwater clip system with a pre fitted seal is easy to install even for a complete novice and it's compatible with most metal and plastic systems installation is easy fit the gutter end bracket just below the top of the fascia using 225 mil by 5 mil round head brass or zinc screws position the gutter outlet where the downpipe will be located ensuring it's lower than the end bracket attach a piece of string between the outlet and end bracket as a position guide for the other support brackets using a spirit level against the string ensure this are fall towards the outlet using 225 mil by 5 mil round head brass or zinc screws attach supporting fascia brackets evenly between the end bracket and the position of the gutter outlet or union piece if use for longer spans ensure brackets are positioned at a maximum of 800 millimeters apart fit the first piece of guttering using the back-to-front rule if require fitter stop n supported by a bracket within 150 millimetres of the stop end for additional lengths of guttering fit a union bracket and use a silicon lubricant for easy fitting ensure all pipe work is cut and fitted to the indicated expansion line to fit the downpipe drop a plumb line from the top of the outlet to correctly aligned the downpipe clips fit uppermost length of down pipe first securing brackets with 232 mil by six point five mil round head brass or zinc screws if angles or offset bends are used then secure with brackets within a hundred and 50 millimetres of the fitting for additional lengths of down pipe use a socket and pipe clip finally fit a shoe at the end of the down pipe to stop the build-up of leaves fit gutter and outlet guards for more product info visit www.flu.gov