Many Strymon pedals including the El Capistan, Flint, and Brigadier can be used with the Strymon Tap Favorite switch to either save a favorite preset or control an external tap function. Tap Favorite can also be used to control Rotor Speeds on our Lex pedal, but since that setup is different, we'll go over that in another video. Before we get started, make sure you first have the Tap Favorite switch set to favorite mode. To do this, unscrew the four screws on the bottom of the chassis. Once opened, locate the small jumper underneath the circuit board and switch it from the center and left pins to the center and right pins. First, set both 3-way toggle switches to the middle position. While holding down both footswitches, power up your pedal and continue to hold down the footswitches for about 2 to 3 seconds. Let go of the footswitches and your pedal is now ready to be used with the Tap Favorite switch. To save a favorite preset on your Strymon 5-knob pedal, connect the Tap Favorite to the expression pedal input of your Strymon device with the included TRS cable. Engage your 5-knob pedal and your Tap Favorite switch. Dial in the tone you want to save. Finally, press and hold the bypass footswitch on the 5-knob pedal for about 2 to 3 seconds to save your preset.