nothing worse than a green pool pump that's making a noise here I'm gonna show you four quick steps on how to fix it first let's switch off the power then let's remove it from the water outlets which are attached to the filter X that we want to unscrew the mitt and screw the bulbs from the mechanical seal side split open the pump and then we carefully detach unscrew tap around the impeller now what we left is the debris on the impeller this is what's stopping the filler from spinning freely and making that humming noise so let's clean off the debris from the impeller and the seals cymbal our caps and seals back together and we can now start to assemble the pump back together so we put all the right screws in the right place it's really important that we bolt the screws back firmly and tightly not over tight firm enough make sure the seals nice and firm that we don't have air rushing through the seals and then heading north to run through next step is the touch-up pump back to the filter catch their water outlets back to the pump one of our final steps is to fill up the plant or the reservoir with water so tuna chamber this stops air sucking trim and then we're finished that's it job done and water pump is back working