Welcome to this Nespresso User Guide video on the rinsing functions of your professional Aguila machine. The Aguila machine was established with automatic rinsing. This process is necessary to both ensure hygiene and to provide the perfect coffee aroma. Aguila has 3 types of automatic rinsing. WAKE UP RINSING If your machine was idle for more than 30 minutes, it goes into energy saving mode. To reactivate the machine, push any button. An automatic wake up rinsing will happen. Simply remove all cups and glasses from the cup supports and drip grid. The rest is done by the Aguila machine. AUTOMATIC RINSING AFTER EACH MILK PRODUCT After each milk product preparation, an automatic rinsing will set in, making sure all milk is completely removed from the milk line inside the machine to prevent clogging. The automatic rinsing process takes only 5 seconds and happens inside the machine. AUTOMATIC RINSING AFTER 5 MINUTES AFTER LAST MILK RECIPE 5 minutes after the last milk recipe, an automatic rinsing will set in. This rinsing process is important, as milk is a very perishable product. All cups and glasses should be removed from the tray. If you have already inserted a capsule, do not remove it. After the machine has heated up, it will brew the coffee automatically. The Blinking buttons and a count down on the display indicate the rinsing is about to start. After this rinsing is over, the machine is heating up and buttons blink again. Then the Aguila is ready for preparation of milk products again.