brought to you by 1a auto calm your source for quality replacement parts and the best service on the Internet hi I'm Mike Green I'm one of the owners of warning Auto I want to help you save time and money repairing and maintaining your vehicle I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1a auto calm the right parts install correctly that's going to save you time and money thank you and enjoy the video in this video we'll be removing the front bumper cover on this 2007 Toyota Corolla now you'll need to do this if you need to replace the headlights or fog lights or the windshield washer bottle it's actually a pretty easy process it's only a few fasteners you'll need a phillips screwdriver a flat blade screwdriver and a ten millimeter socket and ratchet and extension and that's only if you're doing some of the other repairs to get the fascia off you actually really only need a phillips and a flat blade screwdriver okay to remove the front fascia it's actually a series of screws okay here's one and then obviously there's one just like that on the other side and then what you do is you pull your back and you can see right there that's two okay and then underneath look at the front there's one layer and then right there okay and then this is a screw here this little bumper you'll need to this is it's kind of a screw you can actually just kind of pull the center of this up and then pull the clip out obviously another screw and then there are two connectors okay okay you can use a little screwdriver and pop them down then reaching behind and just pull them out and there's two of them one there and one there so once you've got all the fasteners out you just start on the sides okay pull down and pull out the pin is a clip here and then just kind of shake it and pull it out okay that's free do that on the other side and then it pulls right off okay so now we're going to put the fun face back on the car okay I'm going to handle by here carefully slide it on and I want to make sure I go up and over the styrofoam reach back in here I'm just kind of pushing it making sure I push the styrofoam in behind the fascia okay now I'm doing to push it on and I have my little middle clip in my hand push that down and in so I've got it secured then I'm going to push that and clip the lights in flip this side in do the same thing on the other side push back clip it in okay and now I can install my fasteners and my bolts that's ready to go what we want to do is pull out the bottom a little bit push in here inner fender and shuts fine you want it in behind the fascia okay in underneath here you can see it as a clip here that clip has to be under the fascia and up over this plastic okay and then you kind of push it all together awkward because I'm trying to push together the leg and firm and everything but you should rather let a well make sure that you get all this plastic together there is a hole when this underneath part here this has to go up through so it holds it all in place okay now this one as well you can see that I'll make sure that the fascia goes into that clip there and then this one comes up and underneath goes through everything and holds everything together so my clubs back in go right up underneath pull out push them in okay again just make sure the center is pulled out like that reach it on there then enough okay got click here screw here to tighten up screwed here okay one two screws under here a screw here and the screw and the same thing on the other side but to you by ww1 aro calm your source for quality replacement parts and the best service on the Internet feel free to call us toll-free 888 eight four four three three nine three the company that's here for you on the internet and in person thank you