hello again this is Dan ball with hardcore perlier.com today we are going to do some ironing we have Donkey Kong and we have Bowser from Super Mario Brothers 3 we did a the video earlier you may have seen this is going to be part 2 of the video we have our Donkey Kong here ready to go as you can see he is taped up with masking tape we have our holes poked there as you can see pulls all ready to go once again we poke holes in the masking tape while doing this method to allow the beats to breathe so that when you are running the iron over this the air can escape and the beads will close up we are going to be using Reynolds brand parchment paper let's start off here piece of paper that's suitable for it I like to use the scissors instead of the specific cut a bit nicer edge to little torn up there we made it some actual cookies with parchment paper this is what its intended purpose was okay so we got the parchment paper over Donkey Kong here we're gonna be getting our iron this is a black & decker classic iron it's set on just a little bit over 5 there about 5 and a half which is I call a mid wool sitting it's ready to go or light is turned off so it's nice and hot don't touch it with the iron we're just going to set it on there to start with your iron you don't want to put water in it we're not spraying that we're not doing anything like this this iron has been in use for out a year and a half two years now never seen water inlet at all you don't want to use the water you want this to be dry so you go ahead and just set it down on there let it do its thing it's working its magic now heat enough give it a check starting to do its thing already now the way I fuse my permit art creations here is I do what's called a closed whole fuse I also call it a hard fuse a lot of people will only fuse it to the point to where it's at right there to where the beads are still a little bit open I'd like to close all the beads up and when I display them on the beam side the side that has not yet been ironed right now I'm just giving her the once-over just starting to warm it up here we'll start to focus on the sections as we go Donkey Kong of course from the classic Nintendo arcade game in the era of Galaxian and Galaga pac-man this game was definitely adopted at one of the arcades so you can see here's Mario or as in the game Donkey Kong he was referred to as a chump man he didn't gain as Mario status until Mario Brothers this is the hard fused side the flat side and there's the bead side now that we got everything kind of warmed up there we're just going to start going over it with this you just keep your iron nice and evenly circles so while his feet here we're already starting to get some of the close-up with this brand of iron it has an auto off feature so everyone's all used to tilt it up either a little fall rolling around in there it's a fail-safe so if you leave the iron sitting up in one position for forever it'll turn itself off good feature to happen another but every once in a while little red light will start flashing on and you'll have to give it a tilt of course your mileage may vary with the others that you have all right so we're starting to get a little bit of a close on the feet beads here and then we're just going to work it from the left to the right going once they start to close up just get the tip of your iron and just put a little bit of extra weight on it you dig in there and flatten those guys out start to close up the holes just leave the iron set on there for a little while to warm up more for this donkey kong' we used the perler colors of black and then tan and this color here is rust the orange is a cheddar of course white all of these colors but the rust you can get inside the mixed buckets the rust you have to order separately or you can get them from your local craft store you can leave it setting for set for a little while you don't want to leave it sitting for too too long if you leave it sitting in one place for too long then the beads will really start to melt and neither one of them melt and start your being and kind of filling in the holes too much you still want it to be solid but just go here and circular motions as you can see Donkey Kong is really starting to show up to do paper when it comes to the parchment paper again we're using reynolds brand parchment paper when you get the beads in the buckets or others you'll get this paper here which is great for ironing if you're doing small pieces it works wonderful or small pieces but once you start getting into the bigger pieces you're really gonna want bigger pieces of paper first off and you're not going to want the creases the creases in the paper if you iron if we did the whole thing with this this we just hold the tip I put it over top and started ironing yeah it'll look great he'll iron problem is you're gonna end up with all these little creases in the flat side if you're displaying bean side that's not necessarily a bad thing but I like to use parchment paper with everything I do so now we're just moving over to the other side let this sit here warm up this side nice and warm to the touch a little bit but once you start to the other side just come over here if it won't fall just give it a little push just keep it flat why are you doing the rest his teeth and eyes closed up here and once again on this when you're doing these creations I got a couple other things that I'm going to be ironing here this is of course the excitement bike I gave him a little bit of green board poking holes even in the small ones even on something that's a single board creation you'll want to poke holes makes them a lot easier to iron and that way you can stage a bunch of things at once today I got Excitebike here another Excitebike we got a little bit of the Excitebike people that are on the sidelines go back to ironing here and I'll show you some more things we'll be doing later donkey kong is nearly done move the table ability but I can't see that because the camera is on top all right now we're just getting the final little details just going around the edges look solid be a couple holes here than there let's get the tip of the iron think of there a little bit make sure those things up okay we're gonna call that good next get a couple of your favorite books always Douglas Adams to take a guide of the galaxy and women who run with pulse never read this one read this book several times and that will sit for a little while we're gonna set that off to the side while it cools down we put the books on top of it to keep it flat as it cools down it's why the paper over here and it's time for Bowser it's put away excitement bike guy same thing with this a little bit of parchment paper size get your scissors it's nice and popular TV shows if you set that right on there and we'll start at his feet Bowser of course got his start in the super one we're even really interact well he was like the final boss but the four levels you have no hope 1/4 2/4 3/4 and Bowser was there and every time he was a little bit stronger which was weird because every time at the end of the level you ended up either shooting him with fireballs until he dies or he falls into the hot lava they guess what he's back at the next level that's saying that which does not kill you makes you stronger but super money of others 3 definitely one of the greatest original Nintendo games I remember I didn't have my own Nintendo Entertainment System when this game came up we had to go rent one we had to go to the video store and they actually rented consoles you can rent this a week we rented Super Mario Brothers 3 and iron what do they call it the off-road Ironman off-road - Stuart something like that off-road I think those are the only two we got we might have got something like chip and dale rescue rangers something like that as well ducktales but here's a couple of things that I've made Mario why's we got Dee flying Mario this little town his ears we got shell kick and Mario and these I transformed into refrigerator magnets I'll probably do a tutorial soon about two refrigerator magnets and how to fix these magnets on their because believe it or not it's actually difficult because the material that these beads are made out of are kind of nonstick by nature it's food grade plastic it's meant to not let things stick to it naturally you really got to get in there and the hot glue gun is the only thing that I found that will really make those fridge magnets stick but with perler beads you can make pretty much anything you can imagine there's a lot of limitation in colors but he makes you palette up a little bit you can definitely get some good stuff here's some other things that I've made final to it of course bead side I always like to present bead side my flat sides aren't bad but I I like the fact that they're Pete's you got a little peanut butter jelly time banana he's a lot of fun what does he can see with the ironing did you go off the holes close up pretty quick we're right now because I set the iron there a little bit too long there's a little bit of big-oh moving the iron that's why you don't want to leave in a little place for too long rule flatten this out here and just end we got grandma from kooky clicker that's a lot of fun I get make that me all the things I'm showing you right now you'd be making the fridge magnets ooh got a stormtrooper some things love the ironing a little bit later today there's a Ryu from ninja gaiden and of course you saw the excite mike stuff on making those are gonna be fridge magnets as well I'm doing a whole series for fridge magnets if I want to ruin the shop by moving the camera to show you the fridge I've totally shuttle to you I still might after I've done iron is I'll put the camera on the fridge and here we got some ice hockey guys those are fun now there's nearly dogs all right with these guys out of play I almost forgot to show you my fix-it Felix jr. how about this guy this is gonna be an awesome fridge magnet all right of course the Bowser here as you can see I gave him a little bit of a clear beep order that's one thing I like to do with my stuff given given nice solid boarders to find those edges all right we're gonna call Bowser done here to same deal with this in a couple books whether they be your favorite books are not here and we are going to finish up our Donkey Kong doesn't take you onto these two pulled out once they're close to room temperature maybe a little bit warmer comes off these paper should just slide off they're easy well with this we did leave maybe a couple of little holes a little bit open but I displayed beats I did on rather under do it on that side a little bit then overdo it and really have the beats bleed through but once you're done just grab the corner of the tape and it starts to come off on evenly there pick another corner go around it looks like it's coming off pretty smooth there we go will be always a little bit of a little bit of residue maybe a little bit of tape this is when your loom hook comes in nice and handy if those errant pieces don't like to do is just make the tape into a ball here and just any residue that's left over just roll it take it off we do theirs Donkey Kong all finished up I like this pose that he's in here a little bit of an angry to beat in this chest outside but looks pretty good there's the outside of the bouncer you can see a little bit of these wrinkles as it heats up and then shrinks back down from once again just get a corner of it lift it up hold down the creation here whenever you start to see a little bit of the tape coming off like that when that starts to happen just go around to another edge work your way around to it and looks like this one got a little bit hotter than the others the tape stuck a little bit more with the temperature whenever you see a ton of wrinkles like that usually it means you're gonna be put in a little bit more effort to get the tape off think of Bowser got a little bit cooked here a little bit overcooked because I was showing off my stuff and talking instead of focusing about that but we'll get this all off here this is always a little bit of a pain and it goes here and we'll see you know the difference in something that is done just right and something that's a little bit overdone which is fine it's good to see the difference in there when it comes to brother creations it can be a challenge to get something perfect every time but it always looks good once again we'll look to the rescue no can just dig this tape off here anything with this just ball it up say the residue will stuff off of there this would be able to take off some of the extra little tape that you've left behind if you just run your tape across if you can pull all that extra stuff that gets left behind got Bowser maybe a little tad with a little cleanup there get the rest of the pieces of tape off still looks long flat side on that what's really good oftentimes are the flat sides perfect the bead saw won't be left with a couple of beads they're a little bit overcooked not too difficult to get this stuff out dig it out here you get a little goo gone we'll help you get these at your tape it's out all right so there we go we've got Donkey Kong and Bowser