okay today we're gonna show you how to change the oil on a craftsman yt-3000 lawnmower okay first we have to let it warm up okay after it warms up this is what we gotta do we gotta open the hood and right down here is the oil drain so find an empty jug and then you hold the gallon then you can just take this thing okay and then you pull this little thing off and then you put it in the jug all right we'll start draining is it gonna start draining so what you gotta do is get out you get an oil fill to rinse kind of like this and then um you get it loose and then you hold the towel under it so that no oil you don't spill any oil oh the wind's going throw the old one in the garbage okay so when when it's done draining you pull it out see if it's done and then you put the cap back on put the cap back on and then stick it back up here then you tie it then you tighten it as good as you can by hand okay so you get some oil and pour some on and then you rub it around the gasket with your finger until it seals and then you put it on and then you screw it on so that you're supposed to tighten it no don't use wrench you're supposed to tighten it by hand as tight as you can get it okay and then when you're done putting the cap on you have to do this and then you unscrew this and pull it out and then wipe it off and then you start putting the oil and then you put the oil in slowly okay it should take about two quarts and then you put the lid back on put the lid wipe it off and then put it back in and then screw it on so that it's tight and then you start it up and then when when you're done putting the oil in start it back he said make sure it's not leaking anywhere okay okay then you pull it out and wipe it off and then put it back in to see how much okay looks like it's full so we'll put it back in and looks like it's ready to cut grass now here's my okay of how to change the oil on the yt-3000 craftsman lawnmower