hello everyone this is pouch the paschal workshop i remind you that we post new videos every day today I'm going to show you how to make a hood with a bow such hoots a very convenient you can put a hood on and you can also take it off and say about beautifully it will also look very interesting first you need to measure the height of the hood measure it from the Hat top to the neck base the hood shouldn't be too tight anyway I need to make sure that I'm not making it too small so I need to measure its height this way and that add some food in my case the height of the hood is 80 centimeters that means that one half of this measurement is 40 centimeters for the hood not to be too tight I'll make it 45 centimeters high such hood will be very comfortable let's start working first I need to measure and mark 50 centimeters from the salvage the hood will be 45 centimeters high so making it a bit longer than needed I really hope that you will be working with tracing paper first next I need to draw a straight line 10 centimeters away from the edge the hood will look so cool I'm drawing in absolutely straight line I drew the two lines 50 centimeters and 10 centimeters away from the edges I need to mark the center front in the point where the two lines cross notice that I drew the centre front here put the center front right in the point where the two lines cross and then outline the front neckline do not forget to mark the shoulder seam be very attentive this is the center front be very attentive this is not the edge of the detail is the center front I outline the front neckline I mark the shoulder seam next I need to outline the back neckline draw a straight line to the left from this point I remind you that I outlined the back neckline it should be not straight but slightly round next we need to draw short strained line up from this point these lines copy the front and the back necklines I also need to add about 2.5 centimeters for a dart here this line copies the front neckline and this one the back neckline I made it slightly round and edit cell for the door opening next I need to draw a straight line up from this point I need to do a dart here it should be about nine centimeters high and 2.5 centimeters wide heavily here the center front the shoulder seam the back neckline and the DAR opening when it's closed this part will be even to the back neckline next I need to measure in mark 45 centimeters off from the center front this is the time for you to use your imagination this is how my hood is going to look like you can make it of any shape you like next we need to drop out I need to measure and marked five by five centimeters on each side of the center front these straight-line marks the center at the bow next I need to measure mark the length of the bow down from this point make it as long as you want mine will be 70 centimeters next I need to draw bias angle here the width of the bow on the bottom should be 10 centimeters I'm drawing these details besides I'll alter them later the bottom of the bow should be 10 centimeters right I need to connect these two points next I need to draw a straight line up from this point it should be parallel to this one I'll show you what we need it for the center front line marks the edge of the hood these parts will serve as a facing for the hood and the second there for the bow so basically these parts should copy the original one I'll show you everything I hope that everything is clear so far I decided to outline the details for you to see everything clearly I remind you that this was the first line I drew I used it for drawing the bow the detail on the other side mirror is this one I remind you that this is the center front this is where the hood will be inserted I hope that everything is clear so far I measure it and March 45 centimeters here which outlined the front neckline and then the back neckline I added some further that opening and drew it here I drew this part of the hood by side I will have to make a space and seam here in the bow details it will take me some time to do it with you can make about of any length you want do not forget to make a notch on the shoulder seam I also need to make a notch here what do I need to do next I need to trace the dart and the centre front to the second detail after that I'll tack the dart and make spacing seams on the centre front when I do it I'll tack the hood and insert it in the coat as I can see you liked it when I show you how to make outer clothes the thing is that it's what I'm really good at it's a pleasure for me to show you to you next we need to trace the dirt and take it I also need to draw a fault line here I remind you that this is the center front the thing is that the hood won't be inserted in the center front this is where it will end this is the point which matches the center front I guess start taken now I'm making a space and seam on the center front there will be fold here I've already showed you how to make hoods this one is absolutely different as I've already said there are a lot of different types of hoods I think that I'll show you some of them I'm not a hood type of person anyway I do have a coat with a hood and I'm glad that I do it helps me when the weather is really bad what I also want to say is that if we do wear garments with hoods the hood should be beautiful I need to check the dirt next I need to take the two sides of the hood to each other so these details should be inserted in the center back next I need to check the fault in the center front I don't need to measure or calculate anything much cost me time I remind you that I drew and cut these details by side I'll alter the details when detect it's not hard to do it watch what I'm doing and follow the order of actions do everything just like I show you to be honest I'm tired of taken this is the center front it's also the center of the hood I remind you that I'm making just a mock-up this seam should be ironed steamed all the extra details should be cut you know how to do it I'm just showing you the technique the bow is almost ready next I'll insert the hood in the code the more accurate you are when drawing cotton and taken the easier for you it will be to work further that's it I can tack the hood to the code have a look here this is the neckline I need to touch the hood here first I need to take his center back to the center back next I need to pin the notches on the shoulder seams what we did yeah these edge should mesh the center front it's okay if it doesn't in our case it does have a look here the edge of the bow should mesh the center front will start taking from this point the technique I'm showing you now is very useful this is how the seam looks like from the wrong side and this is how it looks like from the right side I remind you that this is the hood which turns into the bow have a look at me I put the text hood on I remind you that I measured the height of the hood it was 80 centimeters but I made it 90 centimeters high I didn't want the hood to be too tight it looks very beautiful I love how it looks like the bow is also pretty cool you can make an actual bow here if you want you can make it look beautiful it's hard to do it without a mirror I can also tie the bow and take the hood off very beautiful ladies I want us to be different and beautiful in any weather if we have to wear hoods the hood should be beautiful that's all for today my name is bhakti Rina subscribe to my channel write comments share videos press a like and about balance thank you good bye