plus the super driver your bottom of the shoe and then turn it over you can use a bigger screw driver hit you needed keep on angling it and it will come out the camshafts you come out this is the new seal and I put some grease around the lips here also put some grease around he can share you opening here if not the camshaft shell will be too trite and will be turned out the seal is put back to the camshaft so I'm going to show you how I feel back in the rav4 there is not much room to install the camshaft she'll easily before I install the seal I cut a couple piece of wood the hole has to be smaller than the seal this is the O seal so I cut the hole a little bit big but you can cut it smaller if you like so that is an odd piece so in case I need it what I did was I put I put this and I put it on the C ring together put the searing in first you put a searing in there and try to go in a little bit and then put this thing dry on the zoo and cut the power in here and clasp it in you keep on pressing in and ambach the camshafts you go in all the way while pressing the camshafts you in be careful not to make any damages to the component or running running line sticks to it once it's all in thanks for watching