okay so we all deal with wheel locks and we get this question asked all the time will your product work on these darn wheel locks well we prefer you use one of these kits these are been around for a long period of time they call them the emergency lug nut removal kits there's so many different kinds there's the little dears we the hammer on try and that's what we recommend here as you see we got your standard regard lug block and that seems to be the ones that we get the problem the most now these these are made out of some really really hard steel so we preferred not to use a lug ripper on these so what we do is we actually recommend it to buy with these kits and just hammer on and then just begin a ha you should do typical air drill or your paragraph to go ahead and reverse them off and you can get them off very very effectively the kits that we offer have multiple sizes so here's just an example we're gonna go ahead and screw on the my guard lock we're gonna pick the right size you just kind of place it over it got yourself a hammer and we're gonna go ahead and hammer it on nice and tight then which one it is once it's on there nice and tight damn you would normally just remove it with your care wrench they reverse mother we're here I'm just going to use my hand you all know how this works we prefer use these kits then just get it out you want to stick that in a vise instead of your hand obviously and then just hammered that back out and then you can put everything back and you're all good to go if you prefer that you do not use the lug ripper for blood locks it will ruin the drill bit it's not designed for that so go ahead and reach out from one of these kits to help you out thanks