hey what's going on guys Tim here again got another paracord 212 for you today so another design from the paracord community the same author over the weave who did the trade or not it's very similar to the trade or not it's this one's called the fury cuff or fury band so it's a simply a wider trade or not which is you can see here it's got that same Ridge going down to the 10th Center and the same knots on the side right very similar to the track not which we did as well so this one is definitely a fan Demming for those of you who are fans will be wider type bracelets I mean you just kind of see it wrapped rolling wrist there definitely a lot more width on this one so overall this one's not too bad turned out quite well a lot better than expected one sure hello I'd be able to pull it off but anyways yeah hope you guys enjoy this one so remember if you're looking for where to get Perico and all the tools at using this video it's one of my featured gear check out those affiliate links down below because when you shop through those you're hopping up this channel brainy alright that being said let's get into the tutorial hey guys I got my paracord set up using a six strand core if you don't have to do that I have my dedicated tutorial for that subject that out so the way we're going to start this is very similar to the trade or not and we're going to have our core separate from our weaving strand which is this color here so to start off I'm actually going to unhook my paracord now if you look on the back here there's that loop there from creating the six grand core I'm going to go in from behind with my paracord and I'm going to anchor it here because we need that strand going down the middle so let's find that middle right here okay see that loop there if you followed my sixth rancour tutorial you'll have that loop there okay so I'm going to pull the power cord through about a good amount and on the very end of my cord here I've got just a simple loop bar so I'm starting to feel not there so I want to go all the way through and re-anchor down line cord my jig here and now for this part here's what we're going to do we need to loop the cord we need something for the cord to anchor to up top so let's just take our extra excess strands here and tie a simple Solomon knot like so okay and then we're going to let some little tight don't pull it too tight all the way so and then you're going to feed this through here I'm just going to create that Center sort of Ridge okay so there we go so you can anchor these up tops and we're just time down or you can snip and melt these just to secure them but just do whatever you need to do to keep these tight here and then we have the cord going down the middle here like so now we are ready start weeding so the principle of this fury band or fury cuff is the same as a trader except we just have one extra set of strands right so we'll start off in the middle I'm going to go to the right of that cord of the center cord pull everything through okay sweet coming up the middle now you're going to go to the left of it like so to create that Ridge across pull everything through and you've got that first loop up top now we're actually going to go to the right again of this strand we're going to come back up through the middle okay got that strand across now let us cross lay it across the six strands here sorry the three strands then now we're going to go underneath the green here so up and then you're going to go over top of it like that okay and then you going to pull all the XS through so see I'm slowly pulling that through create the first knot there so that's one so now we're going to go do that again we're going to go in between these two strands here we're going to go underneath it and then over top right but you're going to go up again between the two middles with two strands here so we went around and then do one loop and then another loop okay so I'm going to come up from here then go through right there okay we've done one side now now we're going to do the same thing now we're going to go or we have a cord coming out the back here and we're going to bring it out to this side so to the right of the left three strands and pull that all the way through now again you're going to lay the strand across all three inner start out by going beneath below the green strand here you go it and then go above it right and then pull all the excess through like that okay so that's one knot now we do the same on this side again you're going to go below it like so just pull all that through first a little less confusing and then you're going to go above it right here see right there so it's between the third the second and third strand courtrand you just push everything up and that is essentially the first set of knocks now we're going to repeat that process you're going to take your fit again so starting off again the cord is behind we're going to go to the right of the core strand bring that up and then we're going to take that go over the middle again go behind there we go now we're pretty much back where we started and now we're just going to do the same thing you're going to lay the you know the cord over like so go around twice go underneath lay the cord over on that side go around twice and you're back to the middle okay so just keep repeating that cycle of a milk weaving and make your way down your bracelet try to keep everything nice and tight of course and you know that will keep your knots consistent yeah just keep going from there okay so I'm coming down to the end of my bracelet and just got a few more that I can do I think you can do maybe like one more row so let's see how far that goes definitely use a fit at this point because a lot easier but I've been using a fit the whole time so definitely easier with a fydd I can find you one more or like this might be the last row is what I mean so let's get that in there okay so I think that's the last I can do but so you've got a little more space here I can do one more loop around this just for looks let's go in through here well not three and then go through here there we go it's pretty good and I can't do any more there's none of space so let's take this off the fit our sorry take this off the e jig and will depart to us okay so got my braces off the jig and to finish and then we can slip and send you this one right here because there's enough tension in there holding it in so we can just snip and center right there for this one you can undo a little knot we did to hold it in place I think this one will you just snip it in jibt where it is as well it's right there so can melt these two and then of course up top two pins hinge this section in this section so right get these two here those two and then we'll be finished all right and then we have a guys we are done this is in choppy echoes paracord so it looks great turned out wonderfully I definitely for those of you who like being wide bracelets this one that's deadly something you like alright guys so remember to check out my affiliate links down below where to get all the paracord and tools in use in this video and you shop through those you're helping out this channel greatly hope you guys enjoyed this tutorial and I definitely check out all the related links in the description down below ok thank you so much for watching and I'll definitely see you on the next one bye