the rescue booster pack engineered by quick cable makes starting a dead vehicle easy and well quick this program will provide you with step-by-step instructions on how to jumpstart a vehicle using your rescue booster pack before we begin we need to go over some important safety measures always wear safety glasses when working with or around lead acid batteries start by making sure the vehicle ignition is off and in the park position likewise check to make sure the rescue booster pack on/off switch is in its off position second make sure anything and everything that runs on the car battery is turned off that includes headlamps radios air conditioning as well as anything that plugs into the power outlets like cell phones TVs and mp3 players next inspect the car battery to make sure it is not cracked or leaking if it is do not attempt to jumpstart the vehicle a cracked early 'king battery could explode and spray you with acid lastly you will need to identify both the positive and negative terminals or posts on the car battery the positive terminal will be labeled with a plus sign or a P and may be color-coded read the negative terminal will be labeled with a minus sign or an N and may be color-coded black if you can't seem to find the labels the battery is probably dirty just wipe the area around the terminal with the rag once you have determined the positive and negative terminals you are ready to make your connections from the rescue booster pack to your vehicle's battery before you jump start the vehicle make sure the rescue booster pack is adequately charged the meter registers a good charge so now you're ready to begin first connect the red positive clamp to the positive battery terminal or post continue by connecting the black negative clamp to a non moving metal part of the engine look for an unpainted solid piece of metal like a nut or bolt in the engine compartment make sure it isn't touching the battery it's normal to see a little spark when making the connection to the negative terminal do you hear that the rescue booster pack will alert you with an audible signal and a light if you have not connected the clamps properly if this happens check to make sure the booster pack is off and reverse the clamp connections once assured you have the correct connection turn the booster packs on/off switch to the on position don't be alarmed that intermittent beeping is letting you know the unit is turned on when you turn the booster pack off the beeping will stop okay now it's the moment of truth go ahead and start the vehicle after a successful jumpstart of the vehicle turn the booster pack on/off switch to the off position all beeping will stop it's a good idea to keep the car running for a few minutes so the alternator has time to recharge the battery disconnect the black clamp first followed by the red plant and wrap the jumper cables securely in place recharge your rescue booster pack as soon as possible for more information on rescue booster packs visit related sites on quick how to calm