welcome and thank you for joining me this sunshine blinds video will show you how simple it is to install roller blinds let's get started all you will need our metal tape measure pencil screwdriver and for easy installation a cordless drill firstly unpack your blind and carefully check the hardware content against the instruction leaflet that came with your blind it will help if you also read the instructions before you commence the installation next you need to decide which side you want the chain to be on the left or the right all our roller blinds are supplied in the back roll position which minimizes light filtering in from the sides we recommend the brackets at either end should face inwards in this instance we are showing the method of an outside mount now mark the drill holes with your pencil pre-drill the holes with your drill and fasten the mounting screws provided inside mount blinds follow a similar procedure by mounting the bracket to the inside of the window frame insert the chain mechanism into the + bracket then insert the pin end mechanism into the round hole bracket by depressing the pin which will automatically slip into the hole once you push back on the blind for child safety reasons it is a legal requirement for any blind with cords and a cord tension device to be fitted at a minimum height of 1.6 meters from ground level to complete your installation fit the cord tensioner on the side of the window frame using the screws supplied finish by testing closing and opening your blind unity Tommy want further assistance sunshine blinds friendly support staff or on a phone call away right here in Australia so call us sunshine blinds better blind enterprises