okay this is a video I'm showing you how to do a front end alignment on a four wheeler basically just about them all of the same one wheel might be pulling while you're driving like you look go to handlebars and you cut to one side so you go ahead and get a straight edge and you clamp it take your wheels off and clamp it and put it on your hub like that like so and you do it to the other side like that as as you can see then you take a tape measure up and you measure from from one straight edge to the next and then you measure to the back stick it through there some kind of way hook it and measure there then you can going to turn your tie rod right here take these nuts off they both turn the opposite way and unscrew this and keep on turning it and I'll move it one direction the other until you get the same measurement from the from the back to the front so then both measurements supposed to be exactly the same or very close within about an eighth of an inch from one into the straight edge to this straight edge right here by turning either/or tie rod now which one are you going to turn you get your handlebar straight sit there straight and you put your straight edge on and you're going to look down the bike and you're going to see which one is going to be out and as you can see you look at straight down a bike and this one here looks kind of crooked so this is the one whatever which one is crooked and this one here is straight but the handlebar is being straight this is the tie rod here is the one that you're going to have to adjust so loosen up these nuts first both um I gotta be loose make them all the way loose you put a wrench or pipe wrench on your rod here and you turn it to you have the same measurements on the back all the way to the front from straight edge to straight edge and make sure you have a very good straight piece of metal possibly could be a piece of wood or anything that's perfectly straight and that's what you need to do and tighten up your nuts after you have it straight tightened up really good and that'll be your straight front alignment