hey this used to from ApS customer service and today I'm going to show you how to use a rivet gun first off you're going to need the rivet gun you'll need to tool the size of the rivets and drill bit size you'll need something you're going to rivet to like a master a boom a tie strap or something similar that you're going that you want to rivet and then your rivets what I've done is I've pre-drilled the holes for this I strap by simply taking a permanent marker and marking the hole pattern and then slicing up the rivets these are number 66 rivets which fits into about a 3/16 hole so I went ahead and drilled these out and we're ready to mount this size strap we're going to do is we're going to line up the eye strap with the rivets fits nice and snugly in there we're gonna get to riveting I'll do is just one pump each just to get it started it helps when your mass is attached to something so it doesn't slip around on you like this just one at a time there's one and final press here's the final product this beautifully riveted eye strap on your master boom whatever it is we've got our rivet gun and we have the leftover pieces of the rivets you can go to ApS Ltd comm and pick up your rivet gun ice trap and all the hardware you need today