thank you for making your purchase from blinds on the net this instructional video is designed to guide you step-by-step with the installation of your slimline venetian blinds before we begin please unpack all of the parts and lay them out as shown please lay out all parts on the floor and identify them before commencing you may find pre-drilling holes makes drilling in your screws much easier just ensure that the pilot hole is smaller than the thickness of the screw lay up the spring-loaded bracket into the recess make sure you mount the brackets forward enough to avoid any handles the last thing we want is for you to damage your brand-new blinds mark the window frame where you want to install the brackets it's a good idea to measure how far in from the edge the components are avoid installing a bracket over a component in the head rail make sure you use all of the brackets provided if you are faced mounting your slimline venetian you will need to drill through the back of the l-shaped bracket rather than through the top you will need to place the top of the bracket along the top edge of your architrave attach the blind by placing the front lip of the head rail up to the front of the brackets compress the spring by pushing back onto the front edge and in one motion raise the back of the head rail up clipping in the back edge into the bracket as shown lower your blind by pulling the cords in toward the middle of your blind adjust the angle of your blind with the wand attach the cord tie off clip to the wand and secure as shown this will keep your cords out of the way of children and is required by law congratulations you have completed the installation of your slimline venetian blinds from blinds on the net you