alright one that though here is I am going to show you how to change the light bulb on the Vulcan s 650 now the first things thing most people normally get to is they go for a little nut underneath here which is not the one you go for what you do it these two screws here two star screws you have to undo those and then you lift the whole assembly up so I'll show you that those two screws are out and you just lift it up out ah she can't see that now there there's a normally a rubber boot around here but there's not on this particular model but on this particular bike because well that's all sort it all out because it's gonna be taken away by the by the insurance company I didn't bother with the boat or anything but what you do is you unplug your bulb there's a little metal grip there I have to just have to pitch it out that's it tend to flicker out and there's your bulk this is your little running light bulb don't worry about that this is your main bulb that gets unplugged we'll put that to one side for a second this is your new light the LED one and comes with different attachments but this is the original attachment that goes with it plug it in now this LED light corresponds to the grooves in the hole in the light assembly you can't get it in in the wrong direction there so the wire is obviously at the bottom so that goes in there were you looking for the points mm-hmm and then basically it's a bit of a work but you reap end the wiring the sweet the metal clips window we bend them back and then it clips on there like so push it in and right there is all in there and that's it that's how you do it now I'm putting the original bulb back in there because I want this one in case I need a spare so taking out all right so let's do that again we're using the original there you go just break in there why grip this is the part that does the gripping down and in that part there and then putting it back on again [Applause] then this gets plugged into the whatever assembly goes in here I guess looked back onto two poles they stick out from the top of the assembly here press it down and then your two screws go back in again [Applause] [Applause] that's it that's how you do it