[MUSIC PLAYING] The BISSELL Big Green
rental carpet cleaner is quick and easy to use. Start by vacuuming
the entire area. Consider pretreating any
really tough or set-in stains. Pull the top tank handle up,
and remove the dirty water tank. Next, lift out the
clean water tank. Take the clean water
tank to your sink, and fill with hot tap
water to the waterline. Add two capfuls of
BISSELL solution using the built-in measuring cap. There are many solution choices
to fit your cleaning needs. Next, replace the tanks,
making sure the dirty water tank is fully seated on top
of the clean water tank. And you're ready to clean. Start the machine, and
recline the handle. Press the trigger, and
make one slow forward and backward pass over the area. Release the trigger and make one
slow forward and backward pass over the same area to suction
up any additional dirty water from the carpet. Repeat wet and dry passes
overlapping by 3 to 4 inches. The flow indicator
on the machine stops spinning to
let you know when you need more water and solution. Empty the dirty water tank,
and refill the clean water tank with additional
water and solution if you have more cleaning to do. When you are completely finished
cleaning, unplug the machine. Then remove and rinse both the
clean and dirty water tanks. Check the brush
roll and the bottom of the machine for dirt and
debris and remove as needed. Put the tanks back
on the machine, and it's ready to
return to the store. Quick, easy, and you're done. The BISSELL Big Green
carpet cleaning machine.