okay these stoves have adjustments just like dishwashers right here you can turn these with a pair of channellock so once you get them started you can turn them from up top you've got back feet back feet and and then front feet just like normal just like a dishwasher you can adjust the pivot and you can use a level tool over your stove okay so here's our anti tip bracket and you always want to make sure to use these this prevents if someone had the door open and we know the door like a child or a dog or something they don't get baked in the oven the oven could pretty easily tipped forward on them so this bracket gets installed back here and that way the oven can't tip and the back leg slips right into this spot so what needs is a masonry bit and a drill here and it's got a template that you can use here to line up where your spot should be for the holes again this just prevents an unnecessary injury there hold on mark okay and this particular mounting bracket can either be installed in the concrete or in the drywall into the wood instead that's behind so go ahead and go with me the second option and if you want to make this a little bit easier you can pre-drill your holes we can secure our stove in there which means I'm gonna have to call over the countertop after I'm done but that's okay squeeze here there we go okay now ready to push this back into place and again we've got to get it underneath our anti tip bracket that's the one a little bit of a tricky spot so we're gonna push in this hand to the feet slide underneath the bread a nice new stove in place and you can adjust the feet to level it how you like it so if this is a little too low which this actually looks pretty good but if you wanted to raise it up you can turn the feet just like a refrigerator you can pull the bottom and out and that gives you a little clearer view to the feet and these feet just turn so I'm gonna go ahead and raise the front up a little bit so that this goes to the back a little bit more and it also has a rear feet but it's going to lift the front feet up just a little bit just to make this a little tighter a little better you may need channel locks especially the first couple turns and once once it's turned free then then it seems to rotate a little easier and if you want to make it easier you can lift up a little just lift up a little bit just look a little bit turn it like so okay and then we want it to be balanced on the outside it's the same thing and again the first turns usually a little tough so it's a good idea to turn that first turn channel locks and then it frees up quite a bit so here we go and this side will be easier to lift now that the other side's been lifted a bit so there we go one nice new range got just a little bit of cleaning up I got most of the tape material packing to off already I don't move this tape make sure that no one wants to bake with that you know Dante it better next time they make cookies they won't be very good cookies so now we're going to turn our breaker on and then check this puppy out breakers reset now we can test the front light whoa beautiful