okay so that our I put everything together and the washing machine seems to be working now the thing I learned today is like ridicules just don't listen to don't don't even watch other videos on YouTube and take my advice don't don't remove the washing machine from its place just leave it where it is take a flashlight and find the drain cup control off okay so here is a drain pump just remove it it's a bit stiff but ah because of the lot of fluff and the brace and water sediments and whatever else it's sometimes hard to remove so you have to pull very powerfully no I haven't I have it cleaned so my goes off pretty well just remove the whole thing the whole cage and check your propeller if it rotates freely which you can try then only then call a service because there is something wrong very very wrong with the electronics of your pump or the washing machine because the there is nothing else to be broken in the pump as I showed you is an incredibly simple device it should be very reliable so if you see a proper rotates freely only with the only power I have to surpass is the magnetic force of the permanent magnets versus the horseshoe stator so if this works then but your pump does not work then you're probably doomed you have to call a service otherwise just remove everything which could block the propeller then check these little rails you have here and return the cage back to the place carefully okay just crew it inside and you're done even before you screw it back you can check whether your pump works like this just choose a program for draining off sorry this is in Czech language show choose the program for draining draining the washing machine off which is in this case in this position and plug the washing machine into the power and now check the proper as you see it's rotating freely so though it seems that in my case the pump is working ok so now I will connect the washing machine back to the water inlet and the drain outlet and I will call my wife she can use it and she can use it again ok bye