hi my name is Mark I'm here today to introduce to you a new range out of wire mesh today I'm going to demonstrate how easy it is to use our motto why mesh what we're gonna do is stuff with a simple project and we're going to build ourselves a rabbit hutch let me demonstrate how easy is to build what we're going to do now is cut out treated pine timber to build rabbit hutch which can be 1800 in length by 900 hi I've now cut the timber to its correctly and what I'm going to do now is assemble the rabbit hutch using a lot of fasteners we've got a few fastens to use but we're going to start off using alkylated now range and let me demonstrate how easy it is to use those first stage is to construct the walls using our beretta fitted with c100 threads to tag the walls together before using a beretta always use safety glasses and hearing protection we've quickly checked the frame together and now going to securely fasten it with our utter galvanized treated pine screws as you can see we're finished assembling the frame now we are ready to fix the body cage mesh to the hutch there are two ways to fix the mission to the frame the quickest method is to use a colored staple gun fitted with 13 mil 18 gauge auto kalanit staples let me show you how easy it is and the other method is to use I don't lose galvanized staples you now that we've completed wrapping the wire mesh around the hutch we are now going to nail the weatherboards to the frame using utter galvanized bullhead nails as you can see I finished nailing the weather boards to the frame give it a couple of coats of paint and now I'm ready to install the color-block roofing using the auto color bond roofing screws when using the auto roofing screw there's no need to pre-drill though it is a good idea to mark the top of the ridge using a center punch the den will prevent the screw from sliding off the ridge perfect to fit the flashing and the ridge we're going to use the auto color bond rivets now I'm going to demonstrate on how to use our article on revenge first we need to pre-drill into the material select the right color rivet insert it into the hole and use a rivet gun to drive it through there you have it a nice clean finish