so I actually had to make a free-standing swinging gate for your model horses the freestanding swinging gate comes in two step one sets is the fence and the other set is the gates it comes apart for easy storage what you will need is craft sticks something to cut your popsicle sticks you can use scissors but I prefer to use these you'll need wire you will need also something to bend your wire and cut your wire with and of course you will need hot glue I like to work on aluminum foil and I'd like to use a little bit of spray oil so that the hot glue would not stick to it first we're going to make the gate first we're going to make the two rails the top and the bottom this is my top and bottom rail and I overlapped it a little bit for the exits in the middle I'm going to have a less overlap to make it a little longer you can see it is using just the tips these two will be the top in the bottom and these two will be the cross in the middle so now we're going to start by clearing the top so now we're going to put one cross right on the front like that and the other cross girl on the back so there's not one club on the beginning and now over the back cross rails now I have to find the length of the middle support now I'm just gonna cut it off I'm going to glue these small piece for it to stand up I'm gonna go it on the side of this side legs and now I will go on the whole popsicle stick to the bottom so it first and now our gate is finished all I have to do is the age and we'll do that last now we're going to make the fence part the first one you're going to have half a stick and then for the for the sack of the last you're not whole stick I'm now one making one of these fences now I'm going to make one more and I have to I'm now going to now I'm going to glue the back sides the two popped oh six I'm gonna glue them together with two other and now we're going to do the last and the last part of the panel make sure you also now we need a cap up to six so we're going to cut this - know what - yes I'm now going to put a whole popsicle stick second-to-the-last and now we're to start where to cut four pieces of wire and about a new toy and now we're going to make two of these square if you shade so we're going to make that's squared so just try to get it into the middle now we're going to go these two pieces onto the gate it should look just like that and now I have to make two loops you they should look about like that so now I'm going to put those two hooks in those two upper lines and now I'm wearing the tube top and I was sick this is the village project and it can't slip together it can stand by itself and it