the 5055 stronghold suspension system is an extremely comfortable and durable suspender system by Occidental leather this video is designed to show you how to correctly install your new suspenders your stronghold suspension system comes with a sealed bag of installation hardware set aside for later do not discard attach your suspenders to your tool bags if you have an adjusted fit model you will have built-in metal DS for attachment points if you have a component system with a three inch belt use the included loop Hardware slide on the hardware to the appropriate locations on each side of each bag it is important that the padded yoke assembly be worn as high as Comfort allows make adjustments using the pronged buckles make sure the system is even and adjusted equally on both sides make a loose fist with your arms relaxed at your sides the general guideline is that when your suspenders are properly adjusted your finger should comfortably reach the bottom of your tool bags next adjust the length and position of the chest strap so it fits comfortably and does not bind your movement once all adjustments are made it is important to use your system for a couple of days before securing the leather straps to the yoke after the break-in period you are now ready to secure the straps to the padded yoke using the package of blind posts leather washers and screws there are holes pre-drilled in the yoke double-check all the adjustments and then mark the location on the leather strap punch or drill a 3/16 hole in the center of each strap at the marked location slide a leather washer onto a blind post and then from the inside insert through the pad and the leather strap tighten the screw into the blind post with a drop of any kind of construction adhesive so that it will not vibrate out while in the back of your truck now get to work in more comfort for more products and videos visit Best belt calm