today we've built up the Te'o kid first parts and tools the personal need are all these PVC parts which still lengths and numbers and stuff can be found in the description a sprinkler valve and this tire thing to fill it up with air the tools you'll need PVC cutter drill drill bits um pressure gauge this is a piece for a air compressor that you would just switch on to blow air a little adapter piece teflon tape um PVC cement and epoxy the next step you put every all the parts together make sure everything fits there you go I think this is going pretty well the little things to catch someone off camera on the pressure tank a gentle hole and Street in my pressure belt and use teflon tape as I screen it in and on the inside of the nut to make sure it's in and then I put a ring on the box you're out there on the end cap I drill a hole and then pop my tire stem in it and on the inside did another lie on the foxy now it's good to glue one something before we glue want to deburr all of the ends and primer them all so the glue holds well and everything's clean let's start priming you now that all our pieces are primed we can go okay now it's time to glue what are you doing to glue you want you don't want to put too much on and then once you have it on you want to hold of each one for about five seconds you now since we're doing a screwed one I'm not going to actually glue it we're just going to do these other ones together and then later we can do teflon tape and just screw them together this is really going in very well it's like to step on a bit and it's it all the way you now it's just threading them up it's a temple on tape and getting the Gaul set up the next piece we'll want to build it's the trigger um I used a sprinkler valve and the pretty much way to do this is you unscrew your bleed screw put it in epoxy and screw it back in so air can leak out then take off your motor and screwing your brass pieces in seat right in the inside there and then screw on your our trigger our your valve piece but make sure you do you step on tape and then line it up how you want the trigger so we can see the arrows are pointing this way I'm gonna have mine like this and now I'll just keep that lined up and you can screw your face down there you go let's assemble the whole thing now I'm super excited this is the final piece we've let our boxing loose set up overnight so now it's time to do tassel on tape on all the threaded parts when we're doing the teflon tape want to wind it the opposite way that's thread so it doesn't come in a while when we're screwing them together you there you go their farm taken let's go fire this thing okay got my safety glasses on we're here at like Cavanaugh for the first test it's all loaded that is pretty cool we're now it's UPS I yell fire we're now at 90 psi our pressure gauge yeah heart goes it looks like 90 psi is the number I consider that project success it shot 34 I think maybe having a slightly bigger energy would have helped with range but our sort pretty good also the reason why we did there remove a little barrel so we can maybe make a smaller one you can shoot nerf darts or giant one they could shoot pumpkins I don't work oh well see you guys in the next video subscribe