it's weapons freak and I'm about to show you how to make my toothpick crossbow alright here's everything you'll need to build the toothpick crossbow you'll need one rubber band a mini saw or normal saw but mini is better a bamboo are what skewer about this size I'm sorry I don't know the exact size sharpie or any marker a toothpick it came via normal one but if you have like this it's better scissors duct tape hot glue gun drill bits and a drill alright so so first we're going to start with this what you're gonna do is you're going to take apart a clothespin don't you don't need this so just that aside then you're going to want to hold your clothes pins like err your clothespin together like this open your sharpie make sure the clothespin clothes pins are as aligned as possible draw a line down the center on the back of them both like that and also on the front the same way so like that then you're going to want to open it take some sort of a straight surface doesn't really matter anything or then draw it down the two lines try to make a straight line as best as you can it's not a huge deal it just needs to be a straight line you can cut up mess with it later and do that on both all right so now that you've done that you're going to take your saw and just saw down the line and make it pretty big now when you're done song you think it's good you're going to want to put them together like this and your bamboo skewer should be able to fit through the hole pretty well like it should not get snagged you can push it all the way through easily next what you're going to want to do is take your two pieces of or two your two pieces of your clothespin put together like you did before aside take out maybe like four five inch piece of duct tape this then split it down the middle like that so you have two pieces like this now then take your clothes pin make sure as aligned as possible then just duct tape it in front and in the back doesn't need to look neat uh if you want to spend a lot of time on it that's fine and if you just as long as it's tight what I'm trying to say just needs to be really tight so that they don't move around so when you're done it should be like this now you're gonna you got to take your drill find a drill bit that is the same size or at least close to the same size as your bamboo skewer then you're going to want to drill down the middle so that it fits very cleanly all right now that you've done that you should be able to just slide it right through really easily so like this okay then you take your clothes pins and if you look in the front right here you're gonna want to drill a hole right there where I just pointed just on the bottom one it's hard to show but there like that just on the bottom one so now that you've done that you should have this it's okay if it's light it kind of connects to the main one as long as it's pretty low then you gotta take your scissors and actually you know what you got to break this into about something probably about this long and then cut it so it's nice and smooth like this then you gotta put it right here on the bottom into your crossbow shape and then hot glue that right there they've done that it should look like this then the next thing you're going to do is you're going to take your drill and drill out the top so that your bamboo skewer can still fit all the way through so all right now that you've done that your bamboo skewer can flow or go all the way through really smoothly now what you're gonna do is you're going to cut off the point of your bamboo skewer right like a little bit tough but work it out a little bit there we go and make sure the other side is pretty smooth now you're going to take your rubber band and your hot glue gun this and glue your rubber band on to both sides of your little crossbow so just glue it on to both sides of these right here mine isn't glued yet but glue it yeah then once you've done that take this put it through and glue the back part of the band onto this right here all right now the last thing you're going to want to do is pull this out and glue a little bit of hot glue like right here just so that it doesn't go all the way forward because if it does when you let go it'll probably push the hot glue off the back and break the rubber bands all right so now it should be pretty much done give your little stopper so it doesn't go too far through so now you're going to finally take your toothpick if you have one of these it's great pull this back hold it right there push this down and pull down farther until it's pretty far in and hold this take whatever you're shooting at there's an Apple again and fire shot right in thank you for watching my video I hope you enjoyed it I hope it was helpful for you and I hope you have fun with your new toothpick crossbow now also if you could please subscribe to my videos if you enjoyed this one or any of my other ones I'd really appreciate it really helped out so if you could subscribe that'd be great thank you