Artificial intelligent assistant

Please explain how to make a hobby horse for kids : how to position yarn mane for hobby horse

Hi, I'm Karen for Expert Village. Now I would
show you how to apply the yarn mane. Again, you want to measure from the tip of the nose
seven inches from here and just mark it with a pen or a marking pencil. Then see I left
my yarn on the card and it is just loose on the bottom and fold it at the top edge. Then
we are just carefully lay it down and remove the card without disturbing it to much. You
want to take the card off. Then you are just going to sort of pin it
in place. First lay it along the edge of the neck of the horse. Lay that all the way on
the edge down to the bottom and it can stick out just a little bit not to much. That is
a little too much. You want it to just overlap just a little bit less then that even maybe
a quarter of inch overlapping. This is a little bit tricky because of the yarn is loose and
we would just try to pin it place the best you can. You can't really pin it to good because
all the yarn is loose but in a few spots. Then we are going to very carefully sew that
in place. Actually the better way to do it is in a sandwich, the other head section.
So now here is the other head section. This is the right side or the outside of the horse
head. You would lay that on top of the yarn and so that the yarn is sandwiched between
the two layers and we would pin that in place.

xcX3v84RxoQ-4GxG32940ukFUIEgYdPy 1c28da65ebba37d5d1930f33767c63e2