okay so this is a video on how to adjust a 34 pick 3 carburetor on a 1600 dual-port VW motor first off once you've got the carburetor all rebuilt and put back together and cleaned up and you know that everything else is good you want to start with the two screws on the left-hand side of the carburetor the two screws right here on the side and you want to go all the way in all the way in lightly hopefully you don't want to go too hard because you'll strip out the threads one bottom and out and that's your starting point for both screws all right hit bottom now you want to come two and a half turns for both screws two and a half turns out let's have one half two now two and a half turns out and you want to do the same with a little screw I'm not going to do it right now it's already set now we want to make sure that the automatic choke is set exactly to where the lines match up with the line on the cylinder right here I'm going to make sure that those lines match up if they are off it's not going to run right and it won't they won't work might work but it's not going to be good okay well that's about it for now thanks for watching