hello my name is David and I'm here with tech dragon today we're going to replace a caliper with the banjo feature tools needed today are a five millimeter allen wrench four millimeter allen wrench three millimeter allen wrench t25 Torx wrench the t15 Torx wrench and a seven millimeter open end wrench and alcohol solution and replacement o rings included end tech jaws bleeding kit is bleeding injectors hos cutter piston stopper hose retainer compression Ferrell's brass inserts as well as mineral oil first let's remove the caliper from the fork loosening both bolts before let's remove the clip from the caliper retention bolt now let's remove the caliper retention bolt now let's remove the pads from the caliper I'm now going to listen to holes poked and remove the hose from the caliper don't remove to attention bolt and remove the old bull rings always use new o-rings during installation let's install the new o-rings onto the retention bolt like so let's install the hose onto our new caliper using our four millimeter a lot finished installation by twerking the tension bolt to 6 Newton meters after any caliper or lever change or trimming of hose it is always recommended to rebleed your brakes