okay I've got this like and we need to put on up there right there we've got to fix the hole damage left by the old light fixture we've got about two inches that way let's go an inch and a half an inch and a half let's make a little triangle let's try with the tapered edge of a three inch piece of drywall so pull it out of there we'll drywall mud on thick you if he's cut pretty plate so he's staying in there just pressure you piece of roll tape one excess tape more free to my later head stick that on there you I want very thin right now you actually see the tape through the light like that and we'll come back later and the next layer on I'm going to do this right here I need to remove that that back freedom and this capsule to come off then that guy there then you can wire it up to it I'm fine I bought the same brand these would have been pushed fit they're not too many take these off and use some wire nuts got that in there wipe the white black the blue the black power line for this use the fan until your wire it up the little cap you got they're taking push out want to take cap and it's got to go down on this now twist in there you go push them in there the washer on there and walk it will whip in there and the nut volume back in there and twist it on that's how he's going to get held up there I've got a wire these two guys and I pulled him up and let's go back in those three screws so these three screws I'm hard to get in over that I recommend using a long but not long but use a standard Phillips head with a magnetic in the light that's going to go over and I slide that up on the post and then over that slide this and over that and slide this nut to put this fan here cuz I'm arch good to change speed so go separate right here bend the chain and then I'm going to feed it through right there and then it'll go through the lip overs in the one corner yeah that guy in there and then this guy right here then this guy right here court extension which was good because I wouldn't be able to feed it through otherwise and it did come with a pendant for the new one the guy they're fans going White's going change fan speeds it looks like this off there's high medium low off that leave that on